焊剂烘干机由外箱体、烘干室、温度控制系统等组成。

外箱体由质优钢板及型钢焊接而成，内箱体即烘干室选用耐热不锈钢板制成，内外箱体间充填硅酸铝保温材料。远红外不锈钢电热元件均布于烘干室内，烘干室下部装有出料口，由活门、转轴、手柄、配重杆等组成，出料时只需板动手柄，即打开活门，焊剂从出料口流出，平时在配重杆作用下使活门关闭。

温度控制系统由温控仪表、交流接触器、小型断路器、按钮等组成。

The flux dryer consists of an outer box, a drying chamber, a temperature control system, etc.

The outer box is welded by high-quality steel plate and profile steel. The inner box, namely the drying chamber, is made of heat-resistant stainless steel plate. The inner and outer boxes are filled with aluminum silicate insulation materials. The far-infrared stainless steel electric heating elements are distributed in the drying room. The lower part of the drying room is equipped with a discharge port, which is composed of a valve, a rotary shaft, a handle, and a counterweight bar. When discharging, just move the handle to open the valve, and the flux flows out of the discharge port. Normally, the valve is closed under the action of the counterweight bar.

The temperature control system consists of temperature control instruments, AC contactors, miniature circuit breakers, buttons, etc.